Victor Automotive 3000 Series 22-1-33000-8 Tire Inflator, 12 V
Portable, fast 5 mins fill time, 12 V with 10 ft power cord, 2 ft air hose with twist on nozzle and bleeder valve, dial pressure gauge with auto shut-off, flexible LED work light, raft adapter and sports ball needle.
PORTER-CABLE C2002 Air Compressor, 6 gal Tank, 120 V, Iron
Our 150 psi 6 gal oil-free pancake compressor is constructed with a pancake style tank for stability, with a water drain valve and tough rubber feet. The high-pressure design optimizes air tool performance, delivering 2.6 scfm at 90 psi for quick recovery time. The oil-free pump provides maintenance-free performance. Transporting is easy with the integrated cord wrap.
Tru-Flate 17-369 Ball Foot, Direct Air Line Chuck, 1/4 in MNPT
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
Tru-Flate 24-444 Airline Regulator, 1/4 in, 13 scfm Flow, Polycarbonate
Tru-Flate? airline regulators employ a solid piston and balanced poppet for excellent performance and longer life. The solid piston design is reliable for a broad range of demanding applications and is impervious to a wide range of lubricating oils and greases. Unlike diaphragms, the solid piston resists rupture, cracking or tearing under pressure, constant flexing or high cycle rates. It is impervious to most chemicals, provides accurate control and assures smooth, uninterrupted operation. Tru-Flate airline regulators have fast reverse flow capabilities, allowing installation where dual pressures are required. Feature 2 ga ports and include pressure gauge and non-rising, locking knob adjustment. Maximum pressure 250 psi primary, 2 to 125 psi secondary.
PULSAR PCE6060K Portable Air Compressor, 6 gal Tank, 120 V
This enduring compressor design has been the favorite of millions throughout the years. With a six gallon tank capacity that has been electro statically painted for years of use, powerful 3.5 hp electric motor, oil reservoir creates 115 psi and has output levels of 5.2 cfm at 40 psi and 4.2 cfm at 90 psi, allowing it to operate many air tool for extended periods of time without the worry of recycle time. The PCE6060K incorporates dual pressure gauges and brass quick connect couplers meaning that changing tools is a breeze, even in the middle of a job, while the handy handle and mobility kit allow the job to be almost anywhere there is electricity available.
EDGE GRAVITY FEED SPRAY GUN
Adjustable fluid, air and spray pattern controls; works in a variety of applications, from automotive refinishing to deck and fence work. Specs: required CFM 11, operating PSI 50. Included: (1) nozzle (size 1.4mm) and
(1) 20 1/4 oz plastic paint cup.
Bostitch BTFP02012 Air Compressor, 6 gal Tank, 120 V
This portable, lightweight pancake compressor has a an oil-free, maintenance-free pump that delivers 2.6 scfm at 90 psi and a maximum tank storage pressure of 150 psi. The 78.5 dBA rating is ideal for a quiet work environment.
Tru-Flate 17-551 Tire Gauge, 10 to 60 psi, 1 lb Accuracy, Steel Gauge Case
Professional type dial in a drawn steel casing with a nickel plated brass chuck. Easy-to-read dial calibrated 10 to 60 psi in 1 lb increments. Automatic reset, pressure release valve. Use for passenger cars, vans and light trucks.
Tru-Flate 12-235 I/M-Style Plug, 1/4 in FNPT, Steel
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
Tru-Flate 13-225 I/M-Style Coupler, 1/4 in MNPT, Brass
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
Tru-Flate 17-351 Ball Foot, Direct Air Line Chuck, 1/4 in FNPT
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.